SIG P-Series Dual Adjustable Straight Trigger

Machined from tough steel, the SIG P-Series Dual Adjustable Straight Trigger includes over travel and pre-travel adjustability. Ensure you review the full description prior to ordering. (Scroll down for video introduction.)

Heat treated and finished in black oxide, Nickel Teflon PTFE or Titanium nitride (TiN) Gold. Ensure you review the full description prior to ordering.

The trigger is designed to fit both current and older model traditional double action (DA/SA/de-cocker) P-Series pistols. See the complete fit guide and description below.

Description

The SIG P-Series Dual Adjustable Straight Trigger is the straight-faced version of our legendary curved P-Series Dual Adjustable Trigger. This trigger includes over travel and pre-travel adjustability. (Adjustable for double action slack and single action over travel.)

The optimized trigger face pressure-wall angle provides for outstanding single action sear release and positive, ultra-fast reset control. The ergonomics provides superior double action leverage and control.

Dual Adjustable Straight Trigger Details

This steel trigger is carefully heat treated and finished in black oxide, Nickel Teflon PTFE or Titanium nitride (TiN) Gold. Tight pin hole tolerances assure smooth, solid function. Guaranteed for life against defects in materials or workmanship.

Made with love, supplied with a hex key.

The trigger weight is about .83 ounces (23.45 grams)

Finishes

Black Oxide

• Standard blued finish

Titanium Nitride (TiN)

A well-proven standard layer type through its balanced properties. The golden titanium nitride layer, abbreviated TiN, indicates the following properties:

• High hardness and adhesion
• Good chemical resistance
• Good temperature resistance in air
• Relatively low thermal conductivity
• Attractive, golden color

Fit Guide

The trigger is designed to fit both current and older model traditional double action (DA/SA/decocker) P-Series pistols, including

• X5 All-Round
• P220 (see exceptions below)
• P226
• P228
• P229
• P227 and others

These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system.

This trigger may not be fully compatible with California compliant or similar P-series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device.

The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width.

If you’re looking for the single action only (SAO) version of this trigger, check out the P-Series SAO Dual Adjustable Straight Trigger.

Disclaimer

These parts are intended for installation by a qualified armourer or gunsmith. In some cases professional fitting will be required by a trained, qualified armorer/gunsmith who is very familiar with the pistol’s action. This is due to the varying tolerances present in all mass-produced firearms. Although kits fit with no issues in a great majority of pistols, Grayguns is unable to guaranty perfect functionality in every instance. Grayguns does offer installation services for all parts kits we offer.